Scraping Can Cure Ugly Popcorn Ceilings, But There’s A Better Way

lighterside-staff-authorBy Lighter Side Staff  |  Read More

Recently, we provided a tutorial outline for removing the popcorn from a ceiling. After all, ceiling popcorn is about the most useless (not to mention ugliest) decoration ever. As effective as that tutorial is, some of you might not want to get messy scraping off the old and repainting the new. Or if your house was built in the 1950’s, scraping off popcorn means dealing with asbestos. Not fun.

Well, we have great news! Imgur user, makesomething, chose a different way to handle the ceiling popcorn in a room in his 1950 home. Here’s the thing, they didn’t even bother removing the popcorn at all!


Their ceiling popcorn had been painted over three times beforehand, so they decided to handle things differently.

Removing all those layers would be too much of a hassle.

The original ceiling. We wanted to do something with it, but didn't want to spend too much money. The reason we chose not to scrap off the ceiling is because the popcorn ceiling in this room has been painted over at least 3 times. To avoid the hassle, we decided to just install the planks.

They bought some wooden planks from Lowes, spending about 9 dollars per six pack.

They also bought 2 inch brand nails, which they used to nail some planks to the joists in the ceiling.

The planks we used cost about $9 per pack of six at Lowes in California. These are extremely thin. They are nailed in with 2 inch brad nails onto the joists in the ceiling.

They used a stud detector to find the joists and chalk to mark the spots.

The planks fit together as they have v shaped grooves.

The planks they chose had V-shaped grooves in the ends, making them blend seamlessly.

Almost done.

Altogether, the wood planks cost about $250, which they had some left over.

Complete! It took about 2 days and $250 dollars.

Next came the moulding, which cost about $120. It’s a beautiful method for covering the edges of the outer planks.

Moulding around the vent. We built around the vent because we didn't want to cut into the moulding. We are also thinking about changing the vent later on.

Two days and $370 dollars later, a brand spankin’ new and far more stylish ceiling!

However, if you want to save money, you could always use wooden pallets!

Moulding done. The moulding cost about $120. So the entire project was about $370.

They even had extra planks to decorate one of the walls. All that’s left for them to do is stain the wood.

We had extra planks left over, so we decided to cover the wall next to the fireplace. It's an empty wall that we always felt like needed something.

As with most good DIYs, this one has been puppy approved.

Obligatory dog photo. She would walk in every once in a while to check on the progress.